MeterBoxesDirect

Shopping Cart 0
£0.00

Call Us Now

01453 791616

Electrical Kiosk IP43 Rated (1000x750x300mm) EB0031

In stock
SKU
EB0031
£360.96 £300.80

IP43 Rated, weather-resistant Electric Kiosk suitable for multiple electrical housing applications including meters and air blowers. Suitable for both inside and outside use.

Please note this Kiosk is supplied as Flatpack only. This Kiosk is supplied with hinges, lock and key. The backboard is not supplied with this product but is available to buy online.

 

Dimensions

  • Height: 1000mm
  • Width: 750mm
  • Depth: 300mm

Colour

  • Light grey colour (Ral 7035)

IP43 Rated, weather-resistant Electrical Kiosk suitable for multiple electrical housing applications including meters and air blowers. Also suitable for both inside and outside use. Please note this Kiosk is supplied as Flatpack only.

Please note - A backboard is not supplied with this product. Backboards are available to buy as an optional extra. To purchase a backplate for this product please visit Backplate for the EBP0031.

Dimensions

  • Height: 1000mm
  • Width: 750mm
  • Depth: 300mm

Colour

  • Light grey colour (Ral 7035)

Specifications

  • IP43 rated kiosk suitable for electric installations
  • Constructed from GRP – Glass Reinforced Plastic
  • Suitable for all meters, compressors, etc.
  • Will not corrode, weather-resistant
  • Easily cleaned and can be painted
  • Complete with hinges, lock and key
  • This Kiosk comes as self-assembly only
  • Ral 7035
  • -30ºC to + 60ºC
  • Halogen Free
  • Hinges on right

 

Fitting instructions

  • Full assembly instructions are supplied with this product and are also available below.

Step 1: Seal Assembly Instructions

Step 2: Kiosk Assembly Instructions

  1. Assemble the 2 sides first. The pre-drilled holes with inserts are to be kept at the back of the base plate.
  2. Insert the screws to attach the sides to the base, do not fully tighten the screws at this stage. Turn the kiosk around, the back of the kiosk facing you.
  3. Assemble the backplate to the sides, inserting screws, again do not fully tighten at this stage at 4 corners.
  4. Insert longer dowels at the top of the backplate.
  5. Insert the top plate.
  6. Insert the 4 screws to attach the top plate to the sides.
  7. Fully tighten all of the screws throughout the kiosk.
  8. Insert the backplate and tighten screws.
  9. To attach the door, push down the bottom hinges, it will be placed in the groove located at the bottom corner and top corner. Hinges to be turned 90⁰ to lock in place.
  10. Push in the brass fitting and slide the lock cover-up, turning clockwise with the key and pull out the handle.
  11. Close the door as normal pulling down the handle to lock it in place.

Brochure Download

Related videos

More Information
Height (mm)1000
Width (mm)750
Depth (mm)300
Write Your Own Review
You're reviewing:Electrical Kiosk IP43 Rated (1000x750x300mm) EB0031
Ask a Question